![background image](http://html1.mh-extra.com/html/stihl/fg-1/fg-1_manual_1379543011.webp)
22
english
FG 1
:
Set the filing angle on the guide
to 0°.
:
Pull chain along the bar until the
depth gauge is under the file.
:
Fit the flat file
(2)
(special
accessory) in place of the round file.
:
Adjust thestop
(3)
so that the file
does not touch the cuting edge.
:
Use acorn nut
(4)
to align filing
frame at right angle to the clamping
jaws.
:
Adjust height adjusting screw
(5)
so
that the depth gauge is filed back to
the required height (flush with
gauge). Then remove the filing
gauge and file down all depth
gauges to the same setting.
:
Finish off by filing the slope by hand,
parallel to the stamped marking,
until dimension
“a”
is approx.
0.5 mm.
:
Lubricate the guide with oil.
Impregnate the felt in the guide to
ensure free movement of the filing
frame.
Rotate the file at regular intervals
while filing to avoid one-sided wear.
565BA025 KN
45
45
35
25
35
25
0
0
3
2
565BA014 KN
4
565BA016 KN
5
566BA017 KN
a
565BA022 KN
Oil
Downloaded from
search engine