29
1
After SW loading is complete i.e. 100%,
the set will go to stand by automatically
and will restart again.
2
The set is in M-Node now. Then go to
Design Menu by Pressing MENU =>
AUDIO MENU => 8 5 3 2
3
Go to Setup design menu and Select Clear
EEPROM option and press OK key of
remote.
4
After Clear EEPROM, the set will go to
stand by and will again restart
automatically in RF source.
5
Then verify the modelwise Audio/ Video
settings as per Design data. Verify the SW
date and version in Version info menu of
Design data
6
Then press Shipping in Setup design menu
by pressing OK key of remote, then Switch
OFF and again Switch ON the SET. The SW
loading process Is complete.
Summary of Contents for BT 131
Page 4: ...4 ...
Page 9: ...9 3 Chassis block diagram ...
Page 10: ...10 b Actual Chassis view V59C ...
