29
BR 500, BR 550, BR 600
English
:
Use a screwdriver to pry the rope
out of the starter grip.
:
Remove remaining rope from the
rotor and grip.
:
Thread the new rope through the
top of the starter grip and secure it
with one of the special knots shown.
:
Pull the knot into the starter grip.
:
Thread the end of the rope through
the top of the rope bushing (
6
) and
the rotor (
7
) and secure it with a
simple overhand knot.
:
Lubricate the rope rotor bore with
non-resinous oil.
:
Push the rope rotor onto the starter
post (
8
) and turn it back and forth to
engage the rewind spring’s anchor
loop.
:
Fit the pawls (
5
) in the rotor.
:
Fit the washer (
4
) on the starter
post.
:
Use a screwdriver or suitable pliers
to install the spring clip (
3
) on the
starter post and engage it on the
pawls’ pegs – the spring clip must
point clockwise – see illustration.
213BA018 KN
