21
BR 45
english / USA
General Information
The carburetor comes from the factory
with a standard setting.
This setting provides an optimum
fuel-air mixture under most operating
conditions.
With this carburetor it is only possible to
correct the adjustment of the high speed
screw within fine limits.
Standard Setting
:
Shut off the engine.
:
Turn high speed screw (
H
) counter-
clockwise as far as stop (max.
3
/
4
turn).
:
Open the low speed screw (
L
) one
full turn.
Fine Tuning for Operation at High
Altitude or at Sea Level
A slight correction of the setting may be
necessary if engine power is not
satisfactory when operating at high
altitude or at sea level:
:
Check air filter and clean if
necessary.
:
Warm up the engine.
At high altitude
:
Turn high speed screw (
H
) clock-
wise (leaner) no further than stop.
At sea level
:
Turn high speed screw (
H
) counter-
clockwise (richer) no further than
stop.
Adjusting the Carburetor
L
H
295BA044 KN
Summary of Contents for BR 45
Page 1: ...STIHL BR 45 Instruction Manual Owner s Manual fP...
Page 32: ...31 BR 45 english USA...
Page 33: ...32 english USA BR 45...