22
English
BR 420
:
Thread the rope through the rotor
and secure it in the rotor with a
simple overhand knot.
:
Fit the pawl
(5)
in the rotor and slip
the washer
(4)
over the starter post.
:
Use a screwdriver or suitable pliers
to install the spring clip
(3)
on starter
post and over the peg on the pawl –
the spring clip must point clockwise
– see illustration.
Go to “Tensioning rewind spring”.
Replacing a broken rewind spring
:
Lubricate the new spring with a few
drops of non-resinous oil.
:
Remove the rope rotor as described
in “Replacing the starter rope”.
:
Remove parts of old spring.
373BA026 KN
353BA034 KN
3
5
4