Page 4
Technical Information 28.2010
TI_28_2010_30_01_01.fm
.
Pressurize the tank – move the unlocked pump
handle (
1
) up and down several times – stop
before the maximum operating pressure is
reached (see
If the maximum operating pressure is exceeded, the
safety valve releases the excess pressure.
.
Press the pump handle down and lock it
(see
1.6
Using the pressurized water tank
.
Connect the quick-action coupling (
1
) on the
hose of the pressurized water tank with the
water connection (
2
) on the cut-off machine or
drill used
.
Open the shut-off cock on the cut-off machine or
drill used – the water begins to flow
.
If the pressure in the pressurized water tank falls
to < 0.5 bar (7 PSI), the tank must be pumped
up again
.
If the pressurized water tank is empty, it must be
refilled
After use
.
Disconnect the quick-action coupling from the
cut-off machine or drill used
.
Pull up the red knob of the safety valve until the
pressurized water tank is depressurized
.
Empty the pressurized water tank
.
For drying and storage, keep the pressurized
water tank in a dry, frost-free environment where
it is shielded from the sun's rays
.
If necessary, unscrew the hose and clean the
screen under running water
1.7
Specifications
1
3701TI087 KN
1
2
370TI088 KN
Max. capacity:
10 l (2.6 gal.)
Total contents:
12.5 l (3.3 gal.)
Max. operating pressure
3 bar (43.5 PSI)
Empty weight:
2.7 kg (6 lb)
Tank material:
Polyethylene