![background image](http://html1.mh-extra.com/html/stihl/4137-series/4137-series_manual_1379216038.webp)
37
Series 4137 Components - HT
:
Take out the screws (1).
:
Remove the end cover with cap.
VA
936RA023
1
:
Take the cap out of the end cover.
VA
932RA285
:
Remove the flange.
VA
936RA024
:
Inspect the metering diaphragm
and gasket and replace if
necessary,
Install in the reverse sequence.
VA
936RA025
– Remove flange secured with an
oval end cover,
– Remove flange secured with a
square end cover,
:
Remove the metering
diaphragm (1) and gasket (2)
VA
936RA026
1
2
from the carburetor body.
If the gasket and diaphragm are
stuck together, remove and
separate them very carefully.
:
Inspect the diaphragm and
gasket and replace if necessary.
The diaphragm is a very delicate
component. As a result of the
alternating stresses the material
eventually shows signs of fatigue,
i.e. the diaphragm distorts and
swells and has to be replaced.
Install in the reverse sequence.
9.3.2
Flange Mounting with
Square End Cover
9.3.3
Metering Diaphragm