- 4 -
PARTS REQUIRED
1 pc
P1
Table Tennis Table Top Frame Assembly
4 pcs -
H1
Hex Head Bolt
2 pcs -
P2
Leg with Caster Bracket
8 pcs -
H2
Flat Washer
4 pcs -
P3
Connector
4 pcs -
H3
Lock Nut
STEP 1:
IMPORTANT NOTE: Place table half top with playing surface face down on a CLEAN flat surface
for ease of correct assembly and to prevent any scratches or blemishes to the playing surface.
-
P1
Push down on
LOCK TAB
to release lock and pull up
on
FRONT LEGS
only.
Do not pull up middle legs
as this could cause damage
to the table.
DETAIL A
This end is the front
of the table.
This end is the middle of the table
and does not have white screen
lines and close to Safety Latch.
Front Leg.
Front Leg.
PUSH UP
Hinge Locked
Safety Lock.
FIGURE 1B
FIGURE 1A
DETAIL B
Lay one piece
P1
Table Tennis Table Top Frame Assembly flat with playing surface
facing down as shown in
FIGURE 1A
.
Unlock the
SAFETY LOCK
as shown in
DETAIL A
and raise
FRONT LEGS
to a
vertical position and lock both hinges as shown in
FIGURE 1B
&
DETAIL B
.
Install
P2
Leg with Caster Bracket with
P3
Connectors using
H1
Hex Head Bolts,
H2
Flat Washers and
H3
Lock Nuts
as shown in
FIGURE 2
&
DETAIL C
. Tighten this hardware.
Repeat procedure for other table top.
STEP 2:
P2
P3
H1
H2
H2
H3
FIGURE 2
DETAIL C
Middle Leg.