Stiga MP2 554 Series, Operator'S Manual

Page: 76 / 211

EN - 11
• Carelessness, negligence.
• External causes (lightning, impact, presence of
foreign bodies inside the machine) or incidents.
• Incorrect use or assembly or prohibited
by the manufacturer.
• Poor maintenance.
• Modification to the machine.
• Use of non-genuine spare parts (adaptable parts).
• Use of accessories not supplied or
approved by the manufacturer.
The warranty does not cover:
• The routine/extraordinary maintenance operations
(described in the instruction manual).
• Normal wear and tear of consumables, such
as drive belts, cutting means, headlights,
wheels, safety bolts and cabling.
• Normal wear and tear.
• Deterioration in the appearance of
the machine due to use.
• The substances, oil, petrol, grease.
• Cutting means supports.
• Any ancillary expenses related to the enforcement
of the warranty, such as costs incurred to travel to
the user's location, transfer of the machine to the
Dealer, rental of replacement equipment or calling of
independent enterprises to perform maintenance work.
The warranties covering thermal engines, except for
“ST” engines. These are covered by the warranties
provided by the engine manufacturers themselves,
with all terms and conditions indicated by the same.
The user is protected by his or her own national legislation.
The user’s rights under the national laws or his or her own
country are not in any way restricted by this warranty.
13. MAINTENANCE TABLE
Intervention Frequency Notes
MACHINE
Check all fasteners Before each use par. 7.5
Safety checks/check controls Before each use par. 6.2
Check the rear discharge / side discharge guards. Before each use par. 6.2.1
Check the grass catcher, side discharge chute. Before each use par. 6.2.1
Check the cutting means Before each use par. 6.2.1
General cleaning and inspection After each use par. 7.4
Checking for any damage to the machine. If necessary,
contact the authorised service centre.
After each use -
Replacing the cutting-means - par. 8.1 ***
ENGINE
Checking/topping up fuel level Before each use par. 6.1.1 / 7.2 *
Check/top-up engine oil Before each use par. 6.1.1 / 7.3 *
Air filter cleaning and check * *
Spark plug points cleaning and check * *
Replace the spark plug * *
* Check the engine manual.
** Operation to be performed at the first signs of any malfunction
*** The operation must be carried out by your Dealer or a specialized Service Centre
14. PROBLEM IDENTIFICATION
If problems persist after having performed the above operations, contact your dealer.
PROBLEM PROBABLE CAUSE SOLUTION