Stiga GM Li 10.8, Instruction Manual

Page: 68 / 132

EN | Operating Instruction
GB-2
1. Technical Specifications
Model GM Li 7.2 GM Li 10.8
Battery voltage/operation voltage V/DC 7,2 10,8
Battery type Lithium-Ionen 2,5 Ah
Charging current mA 380 500
Charging time h 3-5 Std.
Operating time min ~ 80 ~ 100
Weight kg 0,58 0,65
Noise pressure level dB (A) 75,7
K=3,0 dB (A)
Vibrations m/s
2
< 2,5
K=1,5 m/s
2
Accessories
Grass cutting blade (GM GB8, GM GB10, GM GB13)
Cutting movements min -1 1000
Cutting width mm 80, 110, 130
Shrub cutting blade (GM SB18, GM SB20)
Cutting movements min
-1
2000
Cutting length mm 180, 200
Cutting thickness mm max. 8
Pruning cutter (GM PD)
Saw blade diameter mm 65
Saw blade rotation speed min -1 200
Grubber (GM RK)
Working motion min -1 1000
Working wide mm 95
• The specified vibration emission value was measured by a standardized test methods and can compare with other
power tools are used.
• The specified vibration emission value can also be necessary for the assessment of work breaks are used.
• The specified vibration emission value can vary during the actual use of the electric tool by specifying the value,
depending on the way how to use the power tool.
•
Note: You create the privilege against vascular pulsations of the hands in time breaks.
•
Try to keep the stress due to vibration as low as possible. For example, measures to reduce vibration stress are
wearing gloves when using the tool and limiting the work time. All phase of the operating cycle must be considered
in this regard, (for example, times when the power tool is switched off, and times when the power tool is switched
on but is not running under load).
•
Always keep hands and feet away from the cutting tools, particularly when switching on the motor!