4
Use limitations
•
Do not use the machine if
you are unable to hold it with
both hands or keep it steady
on your legs while working.
•
Never use the machine
with damaged, missing or
incorrectly positioned guards.
•
Don’t use the machine if
the attachments/tools are
not installed in their seats.
• Never disengage, deactivate,
remove or tamper with
the safety systems/micro
switches installed.
•
Do not use the power tool
if the switch does not turn it
on and off. Any power tool
that cannot be controlled
with the switch is dangerous
and must be repaired.
•
Do not strain the machine
too much and do not use a
small machine for heavy-
duty work. If you use the right
machine, you will reduce the
risk of hazards and improve
the quality of your work.
2.4 MAINTENANCE,
STORAGE
Ensure regular maintenance
and correct storage to
maintain machine safety and
high performance levels.
Maintenance
•
Never use the machine with
worn or damaged parts.
Faulty or worn-out parts
must always be replaced
and never repaired.
•
Be careful during adjustment
of the machine
to prevent
entrapment of the fingers
between moving parts of
the cutting means and fixed
parts of the machine.
The noise and vibration
levels shown in these
instructions are the maximum
levels for use of the machine.
The use of an unbalanced
cutting element, the excessive
speed of movement, or the
absence of maintenance have
a significant influence on noise
emissions and vibrations.
Consequently, it is necessary
to take preventive steps to
eliminate possible damage
due to high levels of noise and
stress from vibration. Maintain
the machine well, wear ear
protection devices, and take
breaks while working.
Storage
•
To reduce fire risks, do
not leave containers with
debris inside a room.
2.5 BATTERY / BATTERY
CHARGER
IMPORTANT
The following
safety instructions are in addition
to the safety requirements
provided in the specific battery
and battery charger manual
delivered with this machine.
•
Only use battery chargers
recommended by the
manufacturer to recharge
batteries. An inadequate
battery charger may cause
electric shock, overheating
or corrosive liquid to
leak from the battery
•
Use only batteries specifically
designed for your power tool.
The use of other batteries may
cause injuries and fire risks.
