Stiga 8211-0072-80 Instructions For Use Manual Download Page 9

23

ENGLISH

EN

covering the valves, the battery should be 

replaced.

3 STORAGE

Empty the petrol tank. Start the engine and let it 

run until it stops.
Replace the oil while the engine is still warm. 
Unscrew the spark plug and pour a tablespoonful 

of oil into the cylinder. Rotate the engine a few 

turns to that the oil is distributed in the cylinder. 

Install the spark plug. 
Clean the entire machine. It is particularly 

important to clean under the cutting deck. Touch 

up paint damage to prevent rust.
Store the machine indoors in a dry place.
Machines with an electric starter:

Remove the battery. Store it well charged in a cool 

place (between 0°C and +15°C). 
At the correct storage temperature, the battery 

should be maintenance-charged every four 

months.

The battery acid is extremely corrosive 

and can cause injuries and damage to 

skin and clothing. Always use rubber 

gloves and glasses (goggles) to protect 

your eyes. Avoid inhaling any acid 

vapour.
Do not incline the battery too much so 

that the battery acid can run out onto 

hands or clothing. If this should 

happen, rinse with plenty of water.

4 SERVICE

Authorised service workshops carry out repairs 

and guarantee service. They use original spare 

parts.

STIGA original spare parts and accessories are 

designed specifically for STIGA machines. 

Please note that ‘non-original’ spare parts and 

accessories have not been checked or approved 

by STIGA. 

The use of such parts and accessories 

can affect the function and safety of the 

machine. STIGA accepts no 

responsibility for damage or injuries 

caused by such products.

Original spare parts are supplied by service 

workshops and by many dealers.
A list of these can be found on STIGA’s Internet 

website at:

 www.stiga.com

.

We recommend that the machine be handed in to 

an authorised service workshop for service, 

maintenance and checking of the safety devices 

once a year.

5 PURCHASE TERMS

A full guarantee is issued against manufacturing 

and material defects. The user must carefully fol-

low the instructions given in the enclosed docu-

mentation.

Guarantee period

For consumer use: two years from purchase date.

For professional use: 300 hours or three months, 

whichever comes first.
For Stiga Park and Stiga Villa, it is possible to have 

a one year extension to the guarantee if the condi-

tions in the service book are satisfied.
For batteries: six months from the purchase date.

Exceptions

The guarantee does not cover damage due to:
- neglect of the user to acquaint himself with ac-

companying documentation

- carelessness 
- incorrect and non-permitted use or assembly
- the use of non-genuine spare parts
- the use of accessories not supplied or approved 

by Stiga

Neither does the guarantee cover:
- wearing components such as blades, belts, 

wheels and cables

- normal wear
- engine and transmission. These are covered by 

the appropriate manufacturer’s guarantees with 

separate terms and conditions.

The purchaser is covered by each country’s 

national laws. The rights to which the purchaser is 

entitled with the support of these laws are not 

restricted by this guarantee.

6 PRODUCT IDENTITY

The identity of the product is determined by two 

parts:

1. The machine’s item and serial numbers:

2. The engine’s model, type and serial numbers:

Summary of Contents for 8211-0072-80



















Reviews: