
EN
GL
ISH
www.stiebel-eltron.com
SHW ACE |
15
CONTENTS | SPECIAL INFORMATION
1.
General information ��������������������������������������� 16
1.1
Safety instructions ���������������������������������������������� 16
1.2
Other symbols in this documentation ���������������������� 16
1.3
Units of measurement ����������������������������������������� 16
2.
Safety �������������������������������������������������������� 16
2.1
Intended use ����������������������������������������������������� 16
2.2
General safety instructions ����������������������������������� 16
2.3
Test symbols ����������������������������������������������������� 17
3.
Appliance description ������������������������������������� 17
4.
Settings ����������������������������������������������������� 17
5.
Cleaning, care and maintenance ������������������������� 17
6.
Troubleshooting ������������������������������������������� 17
7.
Safety �������������������������������������������������������� 18
7.1
General safety instructions ����������������������������������� 18
7.2
Instructions, standards and regulations ������������������� 18
8.
Appliance description ������������������������������������� 18
8.1
Standard delivery ����������������������������������������������� 18
8.2
Accessories ������������������������������������������������������� 18
9.
Preparations ������������������������������������������������ 18
9.1
Installation site �������������������������������������������������� 18
10.
Installation �������������������������������������������������� 18
10.1 Fitting the cylinder casing and DHW circulation line if
required ���������������������������������������������������������� 18
10.2 Thermometer ���������������������������������������������������� 19
10.3 Signal anode ����������������������������������������������������� 19
10.4 Water connection and safety assembly �������������������� 19
10.5 Power supply ���������������������������������������������������� 20
11.
Commissioning ��������������������������������������������� 20
11.1 Commissioning �������������������������������������������������� 20
11.2 Recommissioning ����������������������������������������������� 20
12.
Settings ����������������������������������������������������� 20
13.
Shutting down ���������������������������������������������� 20
14.
Troubleshooting �������������������������������������������� 21
15.
Maintenance ������������������������������������������������ 21
15.1 Checking the safety valve ������������������������������������� 21
15.2 Draining the appliance ���������������������������������������� 21
15.3 Replacing the signal anode ����������������������������������� 21
15.4 Cleaning and descaling the appliance ���������������������� 21
15.5 Replacing flanged immersion heater ����������������������� 21
16.
Specification ������������������������������������������������ 22
16.1 Dimensions and connections ��������������������������������� 22
16.2 Wiring diagrams and connections �������������������������� 24
16.3 Heat-up diagram ������������������������������������������������ 25
16.4 Fault conditions ������������������������������������������������� 25
16.5 Details on energy consumption ������������������������������ 25
16.6 Data table �������������������������������������������������������� 26
GUARANTEE
ENVIRONMENT AND RECYCLING
SPECIAL INFORMATION
- The appliance may be used by children aged 3
and older and persons with reduced physical,
sensory or mental capabilities or a lack of expe-
rience and know-how, provided that they are su-
pervised or they have been instructed on how to
use the appliance safely and have understood the
resulting risks. Children aged 3 to 8 years may
only operate the tap connected to the appliance.
Children must never play with the appliance. Chil-
dren must never clean the appliance or perform
user maintenance unless they are supervised.
- The connection to the power supply is only per-
missible as a permanent connection in conjunc-
tion with the removable cable grommet. Ensure
the appliance can be separated from the power
supply by an isolator that disconnects all poles
with at least 3 mm contact separation.
- Observe the maximum permissible pressure (see
chapter Installation / Specification / Data table).
- The appliance is pressurised. During the heat-up
process, expansion water will drip from the safety
valve.
- Regularly activate the safety valve to prevent
it from becoming blocked, e.g. by limescale
deposits.
- Drain the appliance as described in chap-
ter “Installation / Maintenance / Draining the
appliance”.
- Install a type-tested safety valve in the cold water
supply line. Please note that, depending on the
static pressure, you may also need a pressure re-
ducing valve.
- Size the drain so that water can drain off unim-
peded when the safety valve is fully opened.
- Fit the discharge pipe of the safety valve with
a constant downward slope and in a room free
from the risk of frost.
- The safety valve discharge aperture must remain
open to atmosphere.
- Install a residual current device (RCD).