Operation
Safety
EN
GL
ISH
WWW.stiebel-eltron.COM
SBS 601-1501 W SOL |
15
Symbol
Meaning
Material damage
(Appliance and consequential losses, environmental pol-
lution)
Appliance disposal
f
f
This symbol indicates that you have to do something. The ac-
tion you need to take is described step by step.
1.4 Units of measurement
Note
All measurements are given in mm unless stated oth-
erwise.
2. Safety
2.1 Intended use
This appliance is designed for the storage of heating water and for
DHW heating. A glycol/water mixture of up to 60 % is permitted
if only dezincification-resistant metals, glycol-resistant gaskets
and diaphragm expansion vessels suitable for glycol are used
throughout the installation.
Any other or additional use is inappropriate, in particular usage
with alternative storage media. Observation of these instructions
and of instructions for any accessories used is also part of the
correct use of this appliance..
2.2 Safety information
WARNING Burns
There is a risk of scalding at outlet temperatures in ex-
cess of 43 °C.
!
WARNING Injury
The appliance may be used by children aged 8 and up and
persons with reduced physical, sensory or mental capa-
bilities or a lack of experience and know-how provided
that they are supervised or they have been instructed
on how to use the appliance safely and have understood
the resulting risks. Children must never play with the
appliance. Children must never clean the appliance or
perform user maintenance unless they are supervised.
!
Material damage
The appliance is under pressure.
During the heating process, expansion water will drip
from the safety valve. If water continues to drip when
heating is completed, please inform your heating con-
tractor.
2.3 Test symbols
See type plate on the appliance.
3. Appliance description
DThe appliance combines DHW heating and a buffer cylinder for
the hydraulic separation of heating system and heat pump. The
DHW is heated via a corrugated stainless steel internal indirect
coil that functions like an instantaneous water heater. The volume
of the cylinder is an energy store for DHW heating.
The appliance is ideally suited to operation with a heat pump.
In addition, a threaded immersion heater and an auxiliary heat
source can be connected.
SBS W SOL
These appliance types are also equipped with an internal indirect
coil for solar DHW heating and central heating backup.
4. Cleaning, care and maintenance
f
f
Have the function of the safety assembly and electrical safety
of the fitted special accessories regularly checked by a heat-
ing contractor/electrician.
f
f
Never use abrasive or corrosive cleaning agents. A damp
cloth is sufficient for cleaning the appliance.
4.1 Scaling
f
f
Almost every type of water deposits limescale at high tem-
peratures. This settles inside the appliance and affects both
the performance and service life. If a flanged immersion
heater is installed, the heating elements must be descaled
from time to time. A heating contractor who knows the local
water quality will tell you when the next service is due.
f
f
Check the taps regularly. You can remove limescale deposits
at the tap outlets using commercially available descaling
agents.
ff
Regularly activate the safety valve to prevent it from becom-
ing blocked e.g. by limescale deposits.
5. Troubleshooting
Fault
Cause
Remedy
The outlet flow rate
is low.
The perlator in the tap or
shower head is scaled up
or contaminated.
Clean and/or descale the
perlator or the show-
er head.
If you cannot remedy the fault, notify your heating contractor. To
facilitate and speed up your enquiry, please provide the serial
number from the type plate (no. 000000-0000-000000):
Nr. 000000-0000-000000
26
�0
3�
20
�0
01
7
!