background image

oPeRATIoN 

 

general information

www.stiebel-eltron.com 

CK 20 S | CKZ 20 S | CKR 20 S | CKT 20 S | 

15

EN

GL

ISH

 

- Install the appliance in such a way that the con-

trol equipment cannot be touched by a person in 

the bath or shower.

 

- In the case of a permanent connection, the ap-

pliance must be able to be separated from the 

power supply by an isolator that disconnects all 

poles with at least 3 mm contact separation.

 

- In the event of damage to the power cable this 

must always be replaced by a qualified contractor 

authorised by the manufacturer, using original 

spare parts.

 

- Secure the appliance as described in chapter "In-

stallation / Installation".

oPeRATIoN

1.  General information

The chapters "Special Information" and "Operation" are intended 

for both the user and qualified contractors.
The chapter "Installation" is intended for qualified contractors.

 

Note

Read these instructions carefully before using the appli-

ance and retain them for future reference.

Pass on the instructions to a new user if required.

1.1  Safety instructions

1.1.1  Structure of safety instructions

!

 

KEYWORD Type of risk

Here, possible consequences are listed that may result 

from failure to observe the safety instructions.

f

f

Steps to prevent the risk are listed.

1.1.2  Symbols, type of risk

Symbol

Type of risk

 

 

Injury 

 

 

 

Electrocution 

 

 

 

Burns

(burns, scalding) 

1.1.3  Keywords

KeYwoRd

Meaning

DANGER 

Failure to observe this information will result in serious 

injury or death.

WARNING 

Failure to observe this information may result in serious 

injury or death.

CAUTION 

Failure to observe this information may result in non-seri-

ous or minor injury.

1.2  Other symbols in this documentation

 

Note

General information is identified by the adjacent symbol.

f

f

Read these texts carefully.

Symbol

Meaning

 

 

Material losses

(appliance damage, consequential losses and environmen-

tal pollution)

 

 

Appliance disposal 

 

f

f

This symbol indicates that you have to do something. The ac-

tion you need to take is described step by step.

1.3  Information on the appliance

Symbol

Meaning

 

 

Never cover the appliance 

 

1.4  Units of measurement

 

Note

All measurements are given in mm unless stated oth-

erwise.

2.  Safety

Operate the appliance only when fully installed and with all safety 

equipment fitted.

2.1  Intended use

This appliance is intended for domestic use. It can be used safely 

by untrained persons. The appliance can also be used in a non-do-

mestic environment, e.g. in a small business, as long as it is used 

in the same way.
Any other use beyond that described shall be deemed inappropri-

ate. Observation of these instructions and of instructions for any 

accessories used is also part of the correct use of this appliance.

!

!

Summary of Contents for CK 20 S













Reviews: