4 |
BBI 5
INSTALLATION
General information
INSTALLATION
1. General information
This document is intended for contractors.
Note
Read these instructions carefully before using the ap-
pliance and retain them for future reference.
Pass on the instructions to a new user if required.
f
f
This symbol indicates that you have to do something. The
action you need to take is described step by step.
Relevant documents
Operating and installation instructions for system
components
Note
Please see appliance operating and installation in-
structions for information on the "Guarantee" and
"Environment and recycling".
2. Safety
Only a qualified contractor should carry out installation, com-
missioning, maintenance and repair of the set.
2.1 General safety instructions
We guarantee trouble-free function and operational reliability
only if original accessories and spare parts intended for the
appliance are used.
2.2 Instructions, standards and regulations
Note
Observe all applicable national and regional regula-
tions and instructions.
2.3 Intended use
The set is used in connection with the WPKI 5.
Any other use beyond that described shall be deemed inap-
propriate. Observation of these instructions and of instructions
for any accessories used is also part of the correct use of this
appliance.
3. Appliance description
The BBI 5 internal DHW heating set is intended as a connection
between the WPKI 5 and a DHW cylinder with integral heat
exchanger.
The set enables clear and straightforward connection of a DHW
cylinder to the WPKI 5 compact heat pump installation.
3.1 Standard delivery
The set is supplied in pre-assembled individual parts. All
pre-assembled components are sealed in at the factory.
D
00000
55
09
2
1
2
3
5
2
4
1 Union nut G 1 1/2 female thread
2 Gasket 1 1/2”
3 Pump manifold with non-return valve
4 Female/female pipe fitting G 1 female thread
5 Solder insert Ø 28 with union nut G 1 1/2 female thread
3.2 Required accessories
- UP 25/7.0 E
- UP 25/7.5 E
- WPKI 5
