![Stid TeleTag System Implementation Manual Download Page 5](http://html1.mh-extra.com/html/stid/teletag-system/teletag-system_implementation-manual_1376462005.webp)
© STid 2014 – No unauthorised reproduction | Tag position
5
NA102A03_EN
Vehicle identification: TeleTag UHF
Heavy Goods Vehicle (HGV) / Truck / Bus
For lorries and buses, there are two possible solutions:
Tag inside vehicle on windscreen (TLT model): same positioning requirements as for a car.
Tag outside vehicle on bodywork: place the tag so it is as close to parallel as possible with the
reader antenna, in the desired reading zone.
o
Example with a TML model, on a bus radiator grill: approximately 1.10m from the ground,
not touching the metal windscreen wiper
Installing the tag
Once you have decided where to position the tag, install it using the holder provided.
Using the double-sided adhesive tape provided, affix the holder horizontally on the windscreen and insert
the tag using the method of your choice:
1 – The TeleTag is removable from its holder to transfer it in an other vehicle.
2 – The TeleTag is not transferable.
When you choose the location, bear in mind the space you will need to insert the tag into the holder (look
at the angle of the windscreen).