SPECTRE Access UHF
Read only
Installation procedure
UHF SPECTRE Access
Lecture seule
Notice d’installation
UHF SPECTRE Access
Solo lectura
Manual de instalación
© STid - 20 PA des Pradeaux FR13850 Gréasque - NI1127X03 - Page
4
sur
15
-
Ed. 16/05/2019
To antenna
To module
Label
Wall
Pole
Mounting an Antenna on Module - SLA
-
Attach the antenna on the module with the 4 screws (TCL ALU M4x12)
provided
with the module.
-
Remove the cap from port RF 1.
-
Connect the antenna to port RF 1 of the module.
Reader Dimensions (mm / in) - SLA
Mounting - SLA
Mount with 75 x 75 mm / 0.79 x 0.79 in Standard VESA
mounting bracket M4x12 polier screws provided with
mounting kit)
Two mounting possibilities:
Adjustable wall-mounted kit
(refer to the Installation Procedures
for KFX-UHF-08)
Adjustable pole-mounted kit
(refer to the Installation Procedures
for KFX-UHF-09)
Antenna Connection - SLA
Antenna Cables SMA / SLA
The antenna cables have a male connector and a female connector.
Antenna must be
connected to RF Port 1
4 serializable cable lengths are available:
1.5 m /4.92 ft: CAB-SPECTRE-1.5M
3 m / 9.84 ft: CAB-SPECTRE-3M
9 m / 29.53 ft: CAB-SPECTRE-9M
12 m / 39.37 ft: CAB-SPECTRE-12M
Only possible combinations:
CAB-SPECTRE-1.5M + CAB-SPECTRE-1.5M
CAB-SPECTRE-1.5M + CAB-SPECTRE-3M
CAB-SPECTRE-1.5M + CAB-SPECTRE-9M
CAB-SPECTRE-3M + CAB-SPECTRE-3M
US
FR
ES
US
FR
ES
