- 2 -
BEFORE YOU START
Review detailed product specifications (Fig. 1 and 2)
Antenna Jack
· Internal antenna with product
· Use external for maximum range
Volume Control
Lamp Controller Output
· Works with STI Lamp Controller (STI-30104)
· 3.5mm mono jack, center negative
· 12VDC, 75mA 3 sec
Power Supply Jack (STI-34105)
· 12 VDC 500mA input
· Switching/regulated
· UL Class II, FCC, C minimum
Door to Programming Controls
Acknowledge Button
· Resets all flashing red zones
· Light flickers green as STI sensor
signal is detected
· Push to silence any auto message
Four Zone Light Indicators
·
Solid Red
- sensor is triggered
·
Flashing Red
- zone has triggered
in latching mode. Reset by pushing
acknowledge button, changes back
to green
·
Yellow
- sensor maintenance
required (tamper, low battery)
·
Green
- sensor programmed
·
No light
- sensor not programmed
Program Switch
Zone/Message
Selection Button
· Use to scroll through
default messages
Advanced Programming
Dip Switches
· In PROGRAM mode
switches 3-8 provide
access to 63
messages/tones
Fig. 1
Fig. 2
Stand
High Low
System Reset:
· Clears all programmed zones
