RC-4430
Operating Manual
22
6.8
Control Panel Overview (Remote Control)
No. Item
Description
19
EM-STOP
Emergency Stop Button. Press down to engage. Turn knob
clockwise 45 degrees until it pops up to disengage.
20
Engine (START/STOP) Flip up to link remote controller to machine. / Flip down to unlink.
21
Grinder (FWD/STOP)
Flip up to start rotation of grinding heads (clockwise only). This
starts the main motor. / Flip down to stop main motor.
22
Auto-Leveling (ON/OFF) Flip up to engage Auto-Leveling function. This begins the
"S-Curve" motion of the machine. / Flip down to disengage.
23
0 / I-Start
Turn switch to the right and hold for 3 seconds to connect the
machine to the Remote Controller. The inverter is activated with
sound. / Turn switch to the left to disengage.
24
Radio Enabled Lamp
Remote Controller's Signal Indicator
25
Steering (L/R)
Control lever for moving the machine left (L) or right (R)
26
Steering (F/R)
Control lever for moving the machine forward (F) or reverse (R)
6.9
Simple Procedure for Engaging Remote Control
1. Secure wheels in "locked" state (twist all four wheel knobs into IN position).
On the Control Panel (Machine Back):
2. Turn
Power
(#7) to ON. Power Lamp (#1) becomes lit.
3. Turn
Mode
(#11) to "Radio." Radio Lamp (#4) becomes lit.
On the Remote Controller:
1. Turn
0 / I-Start
(#23) to the right for 3 seconds. Radio Enabled Lamp (#24) becomes lit.
2. Flip
Engine
switch (#20) to START to link Remote Controller to the machine.
3. Flip
Grinder
switch (#21) to FWD to start the main motor.
4. Flip
Auto-Leveling
switch (#22) to ON to start the "S-Curve" motion
(see pg. 9 for explanation)
5. Use
Steering
levers (#25 & #26) to move machine in desired direction.
19
20
21
22
23
24
26
25
