STI-2420 | STI-2418LP
Operating Manual
6
This applies in particular to the fitting and adjustment of safety devices and to welding on
major and load bearing parts.
Spare parts must always comply with the technical requirements and the specifications of the
manufacturer. This is always guaranteed with original spare parts of the manufacturer.
Inspection intervals and intervals for recurring checks specified in these Operating
Instructions must be complied with. At the same time it is necessary to meet the legal
requirements.
To perform maintenance work correctly it is important to be equipped with proper tools for the
task in question.
The location and the operation of fire extinguishers must be made known on each building
site!
Take note of the facilities for fire reporting and fighting fires!
2.3
Personnel Selection and Qualification
Fundamental duties:
Only reliable personnel are allowed to work on the machine
Only trained personnel can be used to operate the machine. Note the statutory minimum
age! Specify clearly the responsibilities of personnel for operation, setting up, servicing and
maintenance work!
Make sure that only authorized personnel operate or work on the machine.
Select clearly the machine operator. Define his/her responsibilities also with regard to traffic
safety regulations and empower him/her to decline instructions from third parties which are
not complying with the safety requirements.
Personnel being trained or made acquainted with the equipment may only be deployed under
constant supervision of an experienced person.
Work on the electrical parts of the equipment may only be undertaken by a
skilled electrician or by a trained person under the guidance and supervision
of a skilled electrician as well as in accordance with the electrical engineering
regulations.
