12
roof hooks
1400022 connection set
1400025 Collector stop set for fastening profile
1400026 Profile set Alu 200/240/270 V
1400035 Profile set Alu 200 H or
1400027 Profile set Alu 240 H or
1400028 Profile set Alu 270 H
Roof-mounted installation on roof-tiles
For roof-mounted installations, a profile set aluminium 1400034, 1400026, 1400027 or 1400028 (depending on the collector
type) as well as one stop set 1400025 is delivered for each collector. If several collectors are mounted in one row, for each
collector crossing one connection set 1400022 is necessary.
In case of multi-row systems only in the lowermost row the stop set 1400025 is used. In the other rows the collectors are
lying on top of each other.
The stop set has to be mounted in such a way that it is fastened dented at a maximum 20 cm from the outer
edge of the collector.
It is possible to combine roof hooks with and without lead cloth.
In doing so, roof hooks are used with a crushed brick in the
bottom row of the hooks. In the top rows roof hooks are fitted
with a lead cloth subsequently.
The installation work is presented in the following pages.
This installation type is suitable for slate, shingle and Prefa
sheet metal roof systems and for sheet metal roofs with stan-
ding seam.
