background image

 

                                                                                                                                                                 

 

 

ci-321

 

 

 

 

 

 

   

Page 2 of 2      

 

 

 

 

REV 000     

a

 2002 STI-CO INDUSTRIES, INC., 11 Cobham Drive, Orchard Park, NY 14127-4187   

Technical Support: E-mail: [email protected] Phone: 1-716-662-2680 Fax: 1-800-685-1122 

Made in U.S.A.

 

 

2.  Use figure 3 as a transparent template for correct antenna placement on plastic card.   

3.  Remove adhesive backing from film using pull-tabs.  

Avoid getting fingerprints on adhesive.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

4.  After adhering film to card, press out any air bubbles. 

5.  Remove top film protecting the antenna contact points. 

6.  Peel backing tape from amplifier using pull-tabs.  

7.  Line up amplifier terminal points with points on the film (Figure 4). 

8.  Apply pressure for 20-30 seconds. 

Adhesive cures in 5 -10 minutes.

 

9.  Use with or with out adhesives.  (not supplied) for temporary mounting.   

Antenna is not weather resistant.

 

 

 

Figure 3 - GPS Film Antenna Template   

Figure 4 Plastic Card Installation 

Reviews: