STI-CO CPAK-SB-VHF, Quick Start Manual, Page: 4 / 4

ci-273
Page 4 of 4
REV 000

2021 STI-CO INDUSTRIES, INC., 11 Cobham Drive, Orchard Park, NY 14127-4187
Technical Support: E-mail: techsupport@sti-co.com Phone: 1-716-662-2680 Fax: 1-800-685-1122
Made in U.S.A.
CPAK STAKE MOUNT
The following components are required for proper deployment of the CPAK using the stake mount; retractable
antenna, stake mount assembly (See Figure 1), and the RF cable with a TNC connector on one end.
INSTALLATION:
1. Unfold the stake mount assembly (refer to Figure 2).
2. Pound the stake assembly into the ground.
3. Place CPAK antenna into the mounting block on top of the stake mount. Use the TNC connector at the
end of the RF Cable assembly to hold the antenna into place when tightened (see Figure 3).
Figure 1 Figure 2 Figure 3
4. Once erect; the CPAK antenna can be unfolded as shown below.
5. Run the RF feed-line to your radio and the deployment is complete.