STG global TANVAC HDV3000, Operator'S Manual

Page: 82 / 329

(Table 14, contd)
C1.1 Engine
Approximate Refill Capacities
Compartment or System
Min Max
External System (OEM)
(2)
Total Lubrication System
(3)
(1)
These values are the approximate capacities for the crankcase
oil sump which include the standard oil filters that are installed
at the factory.
(2)
Enter the capacity for the External System in this row. Refer to
either Caterpillar specifications or OEM specifications for fur-
ther information. Engines with auxiliary oil filters will require ad-
ditional oil. Refer to the OEM specifications for the capacity of
the auxiliary oil filter.
(3)
The Total Lubrication System includes the capacity for the
Crankcase Oil Sump plus the capacity for the External System.
Enter the total in this row.
Table 15
C1.5 Turbocharged Engines and Naturally Aspirated
Engines
Approximate Refill Capacities
Compartment or System
Min Max
Crankcase Oil Sump (Standard)
(1)
4.5 L
(4.8 qt)
6 L
(6.3 qt)
External System (OEM)
(2)
Total Lubrication System
(3)
(1)
These values are the approximate capacities for the crankcase
oil sump which include the standard oil filters that are installed
at the factory.
(2)
Enter the capacity for the External System in this row. Refer to
either Caterpillar specifications or OEM specifications for fur-
ther information. Engines with auxiliary oil filters will require ad-
ditional oil. Refer to the OEM specifications for the capacity of
the auxiliary oil filter.
(3)
The Total Lubrication System includes the capacity for the
Crankcase Oil Sump plus the capacity for the External System.
Enter the total in this row.
Table 16
C1.6 Engine
Approximate Refill Capacities
Compartment or System
Min Max
Crankcase Oil Sump (Standard)
(1)
3.9 L
(4.1 qt)
5.6 L
(6 qt)
External System (OEM)
(2)
Total Lubrication System
(3)
(1)
These values are the approximate capacities for the crankcase
oil sump which include the standard oil filters that are installed
at the factory.
(2)
Enter the capacity for the External System in this row. Refer to
either Caterpillar specifications or OEM specifications for fur-
ther information. Engines with auxiliary oil filters will require ad-
ditional oil. Refer to the OEM specifications for the capacity of
the auxiliary oil filter.
(3)
The Total Lubrication System includes the capacity for the
Crankcase Oil Sump plus the capacity for the External System.
Enter the total in this row.
Table 17
C2.2 Turbocharged Engines and Naturally Aspirated
Engines
Approximate Refill Capacities
Compartment or System
Min Max
Crankcase Oil Sump (Standard)
(1)
8.9 L
(9.4 qt)
10.6 L
(11.2 qt)
External System (OEM)
(2)
Total Lubrication System
(3)
(1)
These values are the approximate capacities for the crankcase
oil sump which include the standard oil filters that are installed
at the factory.
(2)
Enter the capacity for the External System in this row. Refer to
either Caterpillar specifications or OEM specifications for fur-
ther information. Engines with auxiliary oil filters will require ad-
ditional oil. Refer to the OEM specifications for the capacity of
the auxiliary oil filter.
(3)
The Total Lubrication System includes the capacity for the
Crankcase Oil Sump plus the capacity for the External System.
Enter the total in this row.
Lubricating Grease
Caterpillar provides a range of moderate greases to
extremely high performance greases in order to
service the entire line of Caterpillar products that
operate throughout the wide variety of climates. From
this variety of Caterpillar grease products, you will
find at least one of the Caterpillar greases that will
satisfy the performance requirements for any
machine or equipment application.
Before selecting a grease for any application, the
performance requirements must be determined.
Consult the grease recommendations that are made
by the OEM for the equipment when the equipment is
operated in the expected conditions. Then, consult
with your Caterpillar dealer for a list of greases and
the following related characteristics.
• Performance specifications
• Available sizes of containers
• Part numbers
Always choose a grease that satisfies the
recommendations that are specified by the
equipment manufacturer for the application.
Note: If it is necessary to choose a single grease
to use for all of the equipment at one site, always
choose a grease that satisfies the requirements
of the most demanding application.
Do not use the cost per pound as the only factor
when you choose a grease. Use the grease that
yields the lowest total cost of operation. The cost
analysis should include the following factors:
• Parts
SEBU8312-03 45
Maintenance Section
Refill Capacities and Recommendations