stewmac.com
9
Assemble your guitar
Wire the jack
The black ground wire gets soldered to the square (sleeve)
lug, solder the white hot wire to the round (tip). Once sol-
dered, install the jack plate with a #1 screwdriver and the
control cavity cover with a #2 screwdriver.
Mark out the truss rod cover
Drill the holes using a 1/16" bit, drilling 3/16" deep.
Install the bridge and tailpiece
Tighten the tailpiece studs all the way down; the bridge
height will be set during final set up. String up the guitar.
