stewmac.com
page 3 of 9
9.
Attach two levelers to each beam.
We have included urethane pads to cushion the levelers.
Attach them to the swivel head levelers using super glue.
We have also included wooden slats which span the levelers,
giving gentle support to any instrument strapped into the
Jig. Self-adhesive cork pads are included, and may be cut to
any size that suits your needs. Wrap these slats in clean paper
before using them; this provides a smooth surface to protect
instrument finishes under clamping pressure.
10.
Install the eyebolt hanger in either end of the main beam
for storing the Neck Jig.
Your assembled Neck Jig is ready for use!