background image

Luxus Grande

 

11

ADJUSTING THE SCREEN EXTENSION (CONTINUED)

To increase the screen’s fully extended (screen down) stop position:

1   Lower the screen to its current stop position 

2   Locate the red extension (down) thumbwheel located on the left side of the screen tube  Turn the 

thumbwheel in the direction of the (+) sign  If the power is on, the screen will drop incrementally as 
the thumbwheel is turned 

Note: 

One complete turn of the thumbwheel will make approximately a 11” (28 cm) change in the 

screen’s stop position 

To decrease the screen extension:

1   Lower the screen until it is extended about halfway down 

2   Locate the red extension (down) thumbwheel located on the left side of the screen tube  Turn the 

thumbwheel in the direction of the (-) sign 

Note: 

One complete turn of the thumbwheel will make approximately a 3/4” (2 cm) change in the 

screen’s stop position 

Activate the screen in the down direction until it reaches the newly reduced stop position  Repeat this 
procedure until the desired stop position is reached  Once you have made the adjustment, whenever 
you lower the screen, it will automatically stop at the new position 

Note: 

It is recommended that you make a note of any changes made to the factory preset 

Summary of Contents for Luxus Grande S6

















Reviews: