Model A Electriscreen: Owner’s Manual
11
Installing the wireless remote control option
The optional Stewart Filmscreen wireless remote control allows control of
the screen from anywhere in the room.
Note:
The distance between the hand-held remote control and the receiver
can be up to 50 feet (15.24 m). It is not necessary to have uninterrupted
line-of-sight between the remote and the receiver, but there should be no
metal objects between them. The override switch on the bottom of the
receiver can be used instead of the remote control.
Preparing the connection
Before making the electrical connections, you need:
An available AC power source installed near the screen
Making the connection
The diagram in Figure 10 illustrates the connections.
1. Connect the 4-conductor cable to the receiver module.
2. Open the wireless remote receiver module and connect motor
wires according to the labels inside.
3. Plug the receiver module into the const
a
nt AC power source.
Figure 10:
Wireless remote control connection
Wireless Remote
Control
AC
Connect to motor
Wireless Remote
Receiver Module
