background image

Important Safety Instructions 

 
Before using your Stewart Audio Inc. Power Amplifier, please read this 

Owner’s Manual 

carefully to ensure optimum trouble-free perfor-

mance. 
 

WARNING: TO REDUCE THE RISK OF ELECTRICAL SHOCK, DO NOT EX-

POSE THIS AMPLIFIER TO RAIN OR MOISTURE. DANGEROUS HIGH 

VOLTAGES ARE PRESENT INSIDE THE ENCLOSURE. DO NOT OPEN THE 

CABINET. REFER  SERVICING TO QUALIFIED PERSONNEL ONLY.

    

 
 
 
 
 
 
 
 
 
 

 

The lighting bolt within arrowhead symbol, within an 
equilateral triangle, is intended to alert the user to the 
presence of un-insulated “dangerous voltage” within 
the product’s enclosure that may be of sufficient mag-
nitude to constitute a risk of electrical shock to person. 
 
The exclamation point within an equilateral triangle, is 
intended to alert the user to the presence of important 
operating and maintenance (servicing) instruction in the 
literature accompanying the appliance. 
 

 

1.  Read these instructions. All of the safety and operating proce-

dures should be read before the amplifier is installed or operated. 

2.  Keep these instructions. Retain these documents for future refer-

ence. 

3. Heed 

all 

warnings. 

All warnings on the amplifier and in these oper-

ating instructions should be adhered to. 

4. Follow 

all 

instructions 

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, 
DO NOT REMOVE COVER (OR BACK). NO USER-
SERVICEABLE PARTS INSIDE. REFER SERVICING TO 
QUALIFIED SERVICE PERSONNEL.

5.  Do not use this apparatus near water. For example, near a bathtub, 

in a wet basement, near a swimming pool, etc. This amplifier is  
intended to be operated in a controlled indoor environment. 

6.  Clean only with dry cloth. Do not use solvents or abrasive cleaners. 

Never pour any liquid on the amplifier. 

7.  Installation should be performed by a trained and licensed profes-

sional to insure safe and lasting operation. 

8.  Do not install near any heat sources such as radiators, heat regis-

ters, stoves, or other apparatus (including amplifiers) that produce 
heat. 

9.  Protect the power cord from being walked on or pinched particular-

ly at plugs, convenience receptacles, and the point where they exit 
from the apparatus. 

10. Unplug this apparatus during lightning storms or when unused for 

long periods of time. 

11.  Only use attachments/accessories specified by the manufacturer. 

12. Refer all servicing to qualified service personnel. Servicing is re-

quired when the apparatus has been damaged in any way, such as 
power-supply cord or plug is damaged, liquid has been spilled or 
objects have fallen into the apparatus, the apparatus has been ex-
posed to rain or moisture, does not operate normally, or has been 
dropped. 

13. The 24 Volt DC power supply that is supplied with the IntraSound 

System may be connected to 120 to 240 VAC, 50-60 Hertz. Do not 
defeat the ground polarization of the power plug. 

Summary of Contents for IntraSound System











Reviews: