Stewart LED Kit Diagram
The Stewart Filmscreen 6.25 Amp 24 Vdc power supply is used to provide power to all our LED
lighting kits with 1-2 16 foot LED rolls. This ultra-high capacity power supply is perfect for small
to large-scale applications requiring multiple LED lighting hardware, by providing a single power
source instead of multiple low capacity DC power supplies. Direct plug and play 24 Vdc output
connection is available for various connectivity configurations. Please read all information in the
instructions for proper wiring and connectivity.
Warning!
All Wiring should
be done by a
certified
professional
.
24V
6.25 Amp DC
Power
Supply
IR L.E.D CONTROLLER
Input/Output Voltage DC:
12V-24V
Total Output Current: 12 Amps
POWER SUPPLY
LED
AMPLIFIER
One or more LED controllers should not
exceed over 6 amps of total current draw.
4 Conductor, 16-18 Awg. Cable for 32 ft. LED roll x2
Warning!
All wiring should be performed
by a qualified technician.
Please Note:
This power supply should be
enclosed in a proper metal enclosure
and not exposed to the elements.
Never mount in an open area or in an
attic space.
3 Pr
on
g
AC
C
or
d
Two rolls max LED strip in series per
controller for power supply.
If LED strip is too long, it
may be cut to length only
along indicated cut line.
Power Cable