background image

2 Setup 

 

2.1  Setup Precautions 

 

CAUTION: Before installing your amplifier, make sure that 
you have read the Important Safety Precautions at the be-
ginning of this manual. 

 

 

2.2 Amplifier Installation

 

 
 

The AV 25 incorporates a number of different mounting options in or-
der to fit your installation needs.  
 

2.2.1 Pole-Mounting

 

 

The AV Series of amplifiers is Stewart Audio’s first line of pole-
mountable amplifiers. The AV-25 has mount holes on both the top as 
well as the side of the unit which can be used with the AV-Pole bracket 
available from Stewart Audio.  

 
 
 

 
 

 

Part Number: AV-Pole 

2.2.1 Universal-Mount Installation 
 

The AV 25 also has a universal bracket available which allows the unit 
to be mounted against a wall or under a table.  Two screws are in-
cluded in the kit which will affix the bracket to the top or the side of the 
unit. Once this is done, two holes are available for mounting the unit 
where desired.  

 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
CAUTION: Use only the screws provided in mounting 
brackets to the amplifier. Do not overtighten. 

Part Number: AV-Bracket 

AV Series

AV

-25-2

Summary of Contents for AV-25











Reviews: