TM8350R – TM8352R
STEP-BY-STEP ASSEMBLY
3
#0964-3146
©2018 Stevens Industries, Inc.
Due to continuing product development, Stevens reserves the right to change specifications without notice.
3594.TM8350/TM8352.9/25/18
Construct two
Rail Supports
as follows:
a.
Insert dowels on ends of one
X Rail (4)
into
holes in center of two
TK Rails (3)
. Make sure
holes in ends of
X Rail (4)
align with thru-holes
in
TK Rails (3)
. Press firmly into place.
b.
Secure
Rails (3 & 4)
from
(a.)
together with
two
Flat Head Confirmat Bolts (11)
, using the
included
Hex Wrench
.
c.
Repeat
(a.)
and
(b.)
to construct other
Rail
Support
.
STEP
1
FOR TM8352R ONLY (STEP 1):
thru-hole
Lay one
End (1)
flat on floor, with side having the
most holes facing up. NOTE: Holes are closer to
back edge and further from front edge.
STEP
2
FOR BOTH MODELS (STEPS 2-13):
back edge
front edge
Insert dowels on
TK Rails (3)
into holes on
End
(1)
.
(For TM8352R,
TK Rails (3)
are part of the
Rail Supports
from
Step 1
.) Top edges of all
TK
Rails (3)
must be facing same direction. Press
firmly into place.
STEP
3
top edges of
TK Rails (3)
(to identify, note
location of holes
on faces)
Position other
End (1)
on top of assembly, so
dowels on
TK Rails (3)
align with holes on
End (1)
and back edges of both
Ends (1)
are facing same
direction. Press firmly into place.
STEP
4
back edge
back edge
