Fuselage Continued
9.
Now, fit the
left
fuselage side F8 to opposite side of the Central Crutch assembly. Square
the fuselage assembly on a flat surface and bond all mating surfaces with CA.
10.
Locate ply parts F9, F10, and F11. Lay the motor mount plate F11
etched side
down
on
the table. Fit F9 and F10 to the slots in F11.
11.
Fit and bond the motor mount assembly to the
front
of former F2. Ensure that that the ply
motor mount parts are bonded to each other as well.
12.
Fit and bond former F12 to the slots in the
middle
of F1.
13.
Fit and tack glue former F13 to the slots mid-way back in the
rear
portion of the fuselage
sides.
14.
Fit and bond F14a and F14b together to form the fuselage bottom F14.
15.
Fit fuselage bottom F14 to formers F3, F13, and the fuselage sides. Tack glue with medium
CA.
16.
Pull fuselage side together, fitting tabs on F14 to the notches in the fuselage sides. Square
assembly on a flat surface and tack glue F14 to the fuselage sides.
Build Instructions
Heath LNB-4 UM Parasol Build Instructions. © 2012 Stevens AeroModel all rights reserved.
!
Page 10
☐
☐
☐
☐
☐
☐
☐
☐
