9
General description
1. LOW PASS FILTER (L.P.F.):
This variable control allows you to select
the final frequency from
60Hz to 22KHz
that will be reproduced by the
amplifier.
2. HIGH PASS FILTER (H.P.F.):
This variable control allows you to select the
initial frequency from
10Hz to 700Hz
that will be reproduced by the amplifier.
3. LEVEL:
Control of the signal level at the amplifier input that will be
sent to the audio output.
4. HIGH INPUT:
WIRE type connection for input of the signal to be
amplified. Connect to the radio / player via the harness included in the
kit. This input has the
AUTO TURN-ON
feature that allows the amplifier
to be triggered from the radio audio signal.
5. INPUT:
Input of the signal to be amplified. Connect to radio/player via
shielded, quality RCA cables to prevent unwanted noise.
1 2
3
4
5
If the audio signal level of your radio is not sufficient to turn on the amplifier,
use the remote connector (REM) to turn on the product.
