STERO SD1 LOW TEMP DISHWASHER |
3
GENERAL
Installation,
Operation
and Care of
SD1
DISHWASHER
SAVE THESE INSTRUCTIONS
The Model SD1 Dishwasher is a low temperature (140°F recommended, 120°F minimum), chemical sanitizing,
rack-type dishwasher for use with accessory 20" x 20" racks. It is equipped with a 1 HP thermally protected
(internal) pump motor. The motor must cool to restart the pump.
The revolving stainless steel ball bearing wash / rinse arms above and below provide thorough distribution of
water jets to all dishware surfaces. Arms are easily removable for cleaning and are interchangeable. Stainless
steel tubing connects upper and lower systems.
All three doors open together when the spring counter-balanced handle is raised. Durable door glides provide
easy opening and closing.
The SD1 can wash up to 37 racks per hour. Water usage is 1.7 gallons per rack.
After initial manual fill, the machine automatically washes a rack of dishes, drains the wash water, and then
refills with fresh water for the rinse cycle. The rinse water remains in the machine for the next wash cycle.
At the proper time during each cycle, an appropriate amount of detergent, rinse aid, and sanitizer chemicals
are pumped into the wash tank.
Cycle timing is as follows:
Wash
40 seconds
Drain
10 seconds
Flush
3 seconds
Fill
9 seconds
Rinse
20 seconds
