4
INSTALLATION
8) Connect the “power splitter to power source” coming from the piezo buttons to the
power supply connector (battery box or transformer). See drawing below.
9) Connect the “power splitter to solenoid” coming from the piezo buttons to the solenoid
connector. See drawing below.
10) Turn on the water supply. Make sure that there is no water leakage.
11) If your model is Venus Comfort 2031 DF stick the battery box inside the product box
using the two sided adhesive foam tape. The cable connection must point down.
12) Assemble the wall cover panel to the cover seat and tighten it with the bottom
screw.
13) If your model is Venus Comfort 2031 DFE plug
the transformer to the main electricity supply.
14) To activate the flush valve touch one of the
piezo buttons according to needed amount of
water.
15) If needed adjust the flow capacity by turning
the regulating valve.
16) If you need to change the flow time, please
refer to the “Flow time adjustment” section.
