background image

10

11

FILTER CLEANING INSTRUCTIONS

This faucet is provided with one / two stainless steel filter(s) preventing foreign particles 
to enter the lines. If the water flow has decreased, this can be because the filter(s) is/are 
clogged. The filter(s) can be cleaned as follows:
1. Shut-off the water shut off valve (angle valve).
2. Disconnect the flexible pipe/s.
3. Remove the filter(s) and wash it/them under running water.
4. Reassemble the parts. 
5. Make sure that there is no water leakage.

SOLENOID VALVE SERVICING

The

 

solenoid valve diaphragm requires periodical cleaning every six (6) month. 

Remove the diaphragm from the solenoid valve and examine it for dirt. in case it is dirty or 
clogged, wash it under running water and reassemble it. 
Do not attempt to dismantle the solenoid valve if you are unfamiliar with electronic 
solenoid valves.

CARE AND CLEANING OF CHROME AND SPECIAL FINISHES
DO NOT

 use steel wool or cleansing agents containing alcohol, acid, abrasives, or the like. 

Use of any prohibited cleaning or maintenance products or substances could damage the 
surface of the faucet. For surface cleaning of faucet use ONLY soap and water, then wipe 
dry with clean cloth or towel. When cleaning bathroom tile, the faucets should be protected 
from any splattering of harsh cleansers.

MAINTENANCE

10-pack Solenoid Valve Kit

07232000

Seals & Screws Kit

07210188

10-pack Sensor Kit

07220462

Battery box for 6x1.5V AA batteries (batteries not included)

06530096

12-pack 9V transformer (EU plug)

06540002

Remote Control 13B (Optional)

07100005

Soap & Water Remote Control (Optional)

07100014

SPARE PARTS LIST  

Summary of Contents for COOL TF Series










Reviews: