8
GAME SETUP
MANUFACTURED UNDER LICENSE BY STERN PINBALL, INC.
™ & © 2015 WHIZBANG PINBALL LLC. ALL RIGHTS RESERVED.
WHOA NELLIE! MANUAL
#780-50D7-00
13. Slide the crate under the game.
14. Remove the glass and raise the
playfield against the backbox.
While looking into the cabinet
align the Fruit Crate mounts
threaded holes with the cabinet
floor holes.
15. Install and hand-tighten the
5/16-24 X ¾” hex bolts with flat
washer into the mounts located
on the crate.
16. There are two holes in the cab-
inet floor near the front and two
slots in the cabinet floor near the
real of the cabinet.
17. Once all four bolts are started,
tighten them with a wrench.
18. Once the crate is lined up under
the game, lower the leg levelers
until the game comes into con-
tact with the crate.
19. Remove the pinball legs from the
game.
20. Remove the wood trim in the
front and rear of the game with
the leg bolt holes and replace
with the solid trim pieces.
21. Use a Phillips screwdriver to re-
move screws for front trim piece.
Be careful to not damage the
side cabinet decal when remov-
ing and installing the screws.
9
10
12
7
7
FRUIT CRATE SETUP CONTINUED
3
5
