manualshive.com logo in svg

Stern Pinball STAR WARS LE, Service And Operation Manual

Share
Download
Stern Pinball STAR WARS LE Service And Operation Manual Download Page 2

2

  

STAR WARS LE / PREMIUM MANUAL 500-55J6-01

© & ™ Lucasfilm Ltd.

TABLE OF CONTENTS

1.  Setup and Moving .................................. 3

1.1  First-Time Setup Instructions ............................... 3

1.2  Adjustments Menu ............................................... 6

1.3  Transporting the Game ........................................ 7

1.4  Maintenance ........................................................ 8

1.5  Maintenance Kits ................................................. 8

1.6  Common Parts ..................................................... 8

2.  SPIKE System and Node Guide ............ 9

2.1  SPIKE System Overview ...................................... 9

2.2  Node Bus Cabling ................................................ 9

2.3  System Power ...................................................... 9

2.4  SPIKE Node addresses ........................................ 9

2.5  SPIKE Node Programming................................. 10

2.6  SPIKE System Terminology ............................... 10

2.7  Common SPIKE Node Boards ........................... 10

3.  Light, Switch, and Driver Reference ... 11

3.1  SPIKE Node Boards ........................................... 11

3.2  Driver Reference ................................................ 12

3.3  Switch Reference ............................................... 14

3.4  Light Reference .................................................. 18

3.5  Motor Reference ................................................ 23

4.  Electronic Pinouts and Schematics.... 24

4.1  SPIKE-2 CPU Node 0 ........................................ 24

4.2  Cabinet Node 1 .................................................. 26

4.3  Lower Playfield 48V Driver Pinout Node 8 ......... 27

4.4  Mid Upper Playfield 48V Driver Pinout Node 9 .. 28

4.5  Through Serial Opto Receiver Extension 8a ...... 29

4.6  Mode Small LED Board 8b ................................ 29

4.7  Mode Small LED Board 8c ................................. 29

4.8  Mode Small LED Board 8d ................................ 30

4.9  Mode small LED Board 8e ................................. 30

4.10  Five Bank LED Board 8f ..................................... 31

4.11  Right Eject LED Board 9a .................................. 31

4.12  Right Ramp LED Board 9b................................. 31

4.13  Serial 16 LED Board 9c ...................................... 32

4.14  Serial Motor Driver Board 9d ............................. 32

4.15  SPI core Playfield Node 10 ................................ 33

4.16  Main Power Supply ............................................ 33

4.17  Main LED Board 10a .......................................... 33

4.18  Backpanel 48V Driver Pinout Node 11 .............. 34

4.19  Power Distribution Board ................................... 35

4.20  Power Plug Wiring.............................................. 35

5.  Parts Reference .................................... 36

5.1  Playfield Rubber Parts ....................................... 36

5.2  Rubber Size Chart .............................................. 36

5.3  Playfield Assemblies, Top .................................. 37

5.4  Playfield Assemblies, Bottom ............................ 38

5.5  Backbox Parts.................................................... 39

5.6  Speaker Panel Parts .......................................... 39

5.7  Cabinet Parts ..................................................... 40

5.8  Ball Shooter Assembly ....................................... 41

5.9  Auto Launch Assembly ...................................... 41

5.10  Ball Trough Assembly......................................... 42

5.11  Slingshot Assembly............................................ 42

5.12  Flipper Assembly, Left ........................................ 43

5.13  Flipper Assembly, Right ..................................... 43

5.14  Pop Bumper Assembly ...................................... 44

5.15  Pop Bumper Top Assembly ............................... 45

5.16  Bumper Ring Top Assembly............................... 45

5.17  Five-Bank Drop Target Assembly ....................... 45

5.18  Vertical Up-Kicker Assembly.............................. 46

5.19  Up Post Assembly, Long, No Diode .................. 46

5.20  Fork Ramp Opto Assembly ................................ 47

5.21  Spinner Assembly, Ball Guide Mount ................ 47

5.22  Fork Ramp Assembly - Motorized ..................... 47

5.23  TIE Fighter Spring Assembly .............................. 48

5.24  TIE Fighter Post Assembly ................................. 48

5.25  Star Wars LE Spot Lamp Assembly ................... 48

5.26  LCD Display Assembly ....................................... 49

5.27  LCD Display HDMI Cable Assembly .................. 49

5.28  Up Post Assembly - Long No Diode .................. 49

5.29  VUK with Spacer Assembly ............................... 49

5.30  Millennium Falcon Ship Subassembly ............... 50

5.31  Compact Diverter Assembly .............................. 50

5.32  Star Wars LE Left Ramp Assembly .................... 51

5.33  Star Wars LE Right Ramp Assembly.................. 51

5.34  Death Star LE Main Assembly ........................... 52

5.35  Death Star LE Right Assembly ........................... 52

5.36  Death Star LE Frame Assembly ......................... 52

5.37  Death Star Actuator Assembly ........................... 53

5.38  Death Star Linkage Assembly ............................ 53

5.39  Death Star Light Assembly ................................ 53

5.40  Electric Gate Rail Mount Assembly.................... 54

5.41  Star Wars LE Wire Ramp Assembly ................... 54

5.42  Electric Gate Back Panel Mount ........................ 54

5.43  Orbit Opto Assembly ......................................... 54

5.44  Ball Guide 01 Assembly ..................................... 55

5.45  Plastic 08L Assembly ......................................... 55

5.46  Plastic 12L Assembly ......................................... 55

5.47  Plastic 20L Assembly ......................................... 55

5.48  Accelerator Exit Diverter Actuator Assembly ..... 56

5.49  Accelerator Exit Diverter Assembly .................... 56

5.50  Accelerator Assembly ........................................ 56

5.51  Accelerator Coil Spacer Assembly .................... 57

5.52  Accelerator Coil Spacer Assembly .................... 57

5.53  Star Wars LE Back Panel Assembly .................. 57

6.  Specifications

 ....................................... 58

6.1  Game Dimensions .............................................. 58

6.3  Warranty ............................................................. 59

6.2  Warnings, Compliance, and Legal Notices ........ 59

Summary of Contents for STAR WARS LE





























































Reviews:

No comments

Brands by name

Popular brands

Load more brands