ELECTRONIC PINOUTS AND SCHEMATICS
23
TEENAGE MUTANT NINJA TURTLES MANUAL 500-55Q5-01
© 2020 Viacom International Inc. All Rights Reserved.
4. ELECTRONIC PINOUTS AND SCHEMATICS
4.1 SPIKE-2 CPU NODE 0
509-1003-01
CONNECTORS
ID
Connector Type
Description
CN1
5-Pin .156” Header
Backbox 2-channel amplified speaker out
CN2
3-Pin .100” Header
Console Port
CN3
7-Pin .100” Header
Headphone connector
CN4
2-Pin .156”
Cabinet 1-channel amplified speaker out
CN5
7-Pin .100” Header
Line In/Out
CN6
34 Pin 2.00mm Header LCD display connector
CN7
5-Pin .156” Header
48V supply from main power supply
CN8
6-Pin .100” Header
SPI Serial
CN9
USB
USB connector - for software updates,
audit dumps, and expansion modules
CN9
USB
USB connector - for software updates,
audit dumps, and expansion modules
CN10 HDMI
HDMI Out
CN11 RJ45
SPIKE node bus - to cabinet node N1
CN12 RJ45
SPIKE node bus - To Topper accessory Kit
CN13 SD CARD
SD Card connector
CN14 5-Pin .100” Header
LCD Backlight
CN15 3-Pin .100” Header
Backbox Light
CN16 4-Pin .100” Header
3.3v / 5v / 12v
CN17 ETHERNET
ETHERNET connector
CN21 SATA Header
SATA connector
CN22 RJ45
SPIKE node bus - to playfield node
CN25 12-Pin .100” Header
Dedicated switch inputs - service, volume
switches
COMPONENTS
ID
Name
S1
DIP Switches
S2
Reset Switch
SD CARD (CN13)
For system SD card. Note: only to be removed if instruct-
ed to by Stern Service.
BT1
BR1225 3V Lithium battery for game clock between
power cycles
STATUS LEDS
LED ID
Name
Color Description
48V
+48V Supply In
Red
ON: Main system power is connected. OFF:
No 48V system power. Check power supply
connections, cables, and fuses.
3.3V
+3.3V Logic
Red
ON: Logic power supply is good. OFF: Logic
power supply bad, call tech support.
5V
+5V Logic
Red
ON: Logic power supply is good. OFF: Logic
power supply bad, call tech support.
12V
+12V Backbox
Illumination
Red
ON: Back box LED power good. OFF: Back-
box LED power bad, call tech support.
VA
+30V Audio
Red
ON: Audio power supply is good. OFF: Audio
power supply off, call tech support.
VNB
+9V Node Bus
Red
Power for the Node bus. ON: Power for
node bus good. OFF: Power to node bus not
detected, call tech support.
5V (CPU)
+5V Logic
Red
ON: Logic power supply is good. OFF: Logic
power supply bad, call tech support.
SDIO ACT Not Used
Red
Should remain unlit as it is not currently used.
STATUS
CPU Heartbeat,
System Status
Red
Double blink ~1/2 second: Good, Processor
running. OFF: Processor not running, call
tech support.
μSD ACT
Activity indicator
for micro SD Card
Red
Should blink rapidly when reading or writing
to micro SD card.
D23
Netbridge Status Red
Should blink once every ~1/2 second.
DIRECT SWITCH MAPPING (CN25)
The coin-door diagnostic switches are connected directly to the CPU node via the Cabinet Node. Note that both the CPU and
Cabinet nodes are required for diagnostic switch operation.
ID
Name
Conn.
Input
Pin
Input Wire
GND
Pin
Ground Wire Location
Type
Address
Part Number
C1
DIP 1
-
-
-
-
-
CPU Node
0-SW-0
-
C2
DIP 2
-
-
-
-
-
CPU Node
0-SW-1
-
C3
DIP 3
-
-
-
-
-
CPU Node
0-SW-2
-
C4
DIP 4
-
-
-
-
-
CPU Node
0-SW-3
-
C5
DIP 5
-
-
-
-
-
CPU Node
0-SW-4
-
C6
DIP 6
-
-
-
-
-
CPU Node
0-SW-5
-
C7
DIP 7
-
-
-
-
-
CPU Node
0-SW-6
-
C8
DIP 8
-
-
-
-
-
CPU Node
0-SW-7
-
C9
Service Select
CN25
1
LGN-GRY
11
BLK-WHT
Coin Door
0-SW-9
180-5192-04
C10 Service Plus
CN25
2
LGN-VIO
11
BLK-WHT
Coin Door
0-SW-10
180-5192-02
C11 Service Minus
CN25
3
LGN-BLU
11
BLK-WHT
Coin Door
0-SW-11
180-5192-02
C12 Service Back
CN25
4
LGN-BLK
11
BLK-WHT
Coin Door
0-SW-12
180-5192-00
