M a
i n t e n a n c e / s p a r e p a r t s
11
Filter cleaning instructions
This mixer is provided with a stainless steel filter preventing foreign particles to enter the lines. If the
water flow has decreased, this may be because the filter is clogged. The filter can be cleaned as follows:
1. Shut-off the water shut off valve.
2. Disconnect the red and the blue flexible pipes from the back-checks and filter adapters and
then disconnect the back-checks and filter adapters from hot and cold water supplies.
3. Remove the filters and wash them under running water.
4. Reassemble the parts by putting back the filters to the back-check and filter adapters.
5. Reconnect the flexible pipes and restore the incoming water supply. Make sure that the filter
adapters and the filters are installed between the flexible pipes and the shut off valves.
6. Make sure that there is no water leakage
Care and cleaning of chrome and special finishes
DO NOT
use steel wool or cleansing agents containing alcohol, acid, abrasives, or the like. Use of any
prohibited cleaning or maintenance products or substances could damage the surface of the faucet.
For surface cleaning of faucet use
ONLY
soap and water, then wipe dry with clean cloth or towel.
When cleaning bathroom tile, the faucets should be protected from any splattering of harsh cleansers.
Spare Parts List
1. Sensor kit for SWAN 1000, SWAN 1000 B and SWAN 1000 E
2. Sensor kit for SWAN 1000 BM and SWAN 1000 EM
3. Solenoid valve kit for SWAN 1000
4. Solenoid valve kit for SWAN 1000 B, 1000 E, 1000 BM and 1000 EM
5. Filter and back-check adapter kit
6. Insert kit for SWAN 1000, SWAN 1000 B, SWAN 1000 E
7. Insert kit for SWAN 1000 BM and SWAN 1000 EM
8. Battery box (B models only)
9. Transformer (E models only)
Optional accessories:
10. Extension cable (B models only)
11. Remote control
Cat.No. 07220001
Cat.No. 07220002
Cat.No. 07230002
Cat.No. 07230003
Cat.No. 08520003
Cat.No. 07240003
Cat.No. 07240004
Cat.No. 06530001
Cat.No. 06522010
Cat.No. 06009015
Cat.No. 07100001
