![Stermay HT-790 Operation Instructions Download Page 2](http://html1.mh-extra.com/html/stermay/ht-790/ht-790_operation-instructions_1375250002.webp)
X. Fault Handling
IX. Maintenance and Storage
XII. Suggestions
Fault Inspection Solution
The air pump
cannot be
started
normally.
1. The power source is not plugged
properly.
2. Low battery charge
3. Overheating or overload causes
motor stop.
1. Check whether the hose is blocked
or cracked.
2. The joint between the hose and air
pump or air bag is not installed properly.
1. Make sure that the power wire is plugged in the
12V DC socket.
2. Charging.
3. Cool the motor and restart it.
4. If the problem cannot be solved, please contact
local service agents or similar authorized personnel
to change the product.
1. Change the hose or make it unblocked, and check
whether the hose is cracked.
2. Reinstall the hose.
3. If the problem cannot be solved, please contact
local service agents or similar authorized personnel
to change the product.
Slow or
abnormal
inflation or
deflation.
IX. Precautions
As this product has a lithium battery, it can work using the battery, or the plug of the
product can be inserted into the cigarette lighter socket on the car for use.
The applied power source must be the 12V DC power source (as Figure 8).
Do not block the inflation inlet (1) and Deflation outlet (2), and ensure that the inflation inlet
(1) and Deflation outlet (2) shall remain smooth at all times.
Observe the local waste treatment provisions, and it is not allowed to throw the air pump
away randomly.
Don't use this product when the hose is damaged, and please change the hose
immediately.
Don't pull out the hose when inflating, because that the high pressure may hurt the
physical body.
Don't make the air pump work for more than 30 minutes, because that motor
overheating may cause internal damage; and the air pump shall be fully cooled
for 30 minutes after continuously working up to 30 minutes.
Please don't use this air pump if any part is damaged, and please
contact with the professional personnel to repair it.
This product shall not be exposed to the rain or immersed in water.
In order to prevent risk, the inflation inlet shall not be forward to face or
body.
Please don't not leave while inflating.
After using, or if you want to move, maintain or adjust the product, please first pull out
the DC plug from the socket.
when it is idle, it shall be properly stored after being fully cooled.
It shall not be exposed to the rain or immersed in water.
Please store it in the dry and ventilated place.
The warranty period of this product is one year, and it is suggested to use the original
accessories. For any fault not caused by using the original accessories, it shall be out
of the warranty scope.
(Figure 8)
5
HT-790 DC12V
I. Product Introduction......................................3
II. List of Accessories.......................................3
3
4
4-5
5
5-6
III. Details of Accessories.................................
IV. Safety Instructions.......................................
.......................................
6
..................................
6-7
..................................................
7
...............................................
7
...........................
7
.................................................
...................
........................
V.USB Charging Output Operation
VI.Charging using the cigarette
lighter plug/adapter
VII.Inflation Operation
VIII.Deflation Operation
IX.Precautions
X.Fault Handling
XI.Maintenance and Storage
XII.Suggestions
Catalogue
SUP ELECTRIE AIR PUMP