7-6 Returned Material Policy
Credit Returns
Prior to the return of any material
authorization
must be given by
the manufacturer.
A
RMA number will be assigned for the equipment to be returned.
Reason for requesting the return must be given.
ALL returned material purchased from
the manufacturer
returned is subject to 15% ($75.00
minimum) restocking charge.
ALL returns are to be shipped prepaid.
The invoice number and date or purchase order number and date must be supplied.
No credit will be issued for material that is not within the manufacturer’s warranty period
and/or in new and unused condition, suitable for resale.
Warranty Returns
Prior to the return of any material, authorization must be given by
the manufacturer.
A
RMA number will be assigned for the equipment to be returned.
Reason for requesting the return must be given.
All returns are to be shipped prepaid.
The invoice number and date or purchase order number and date must be supplied.
After inspecting the material, a replacement or credit will be given, at
the manufacturer’s
discretion. If the item is found to be defective in materials or workmanship, and it was
manufactured by our company
,
purchased components are covered under their specific
warranty terms.
7-7 Dryer Identification (Serial Number) Tag
(Located on back of Dryer)
Company Logo
XXX Series Dryer
Model Number XXX-15
Max Drying Capacity HR
460V Serial Number 060701R
1
Ǿ
Date of Manufacture 06/2003
4.5A
Over-current Protection Device (s) 4.5A Total
Frequency 50/60Hz
Compressed air supply None
Dryer Mass 400 lbs/(180 KG)
Electrical Diagrams &
Pneumatic Diagram
Street Address
City, State Zip Code
Telephone Number
Portable Drying/Conveying Systems
Chapter 7: Appendix
62 of 63
