background image

29

HOW TO ORDER REPLACEMENT PARTS

Please send the following information to your local representative: if further assistance is needed, contact the
manufacturer's customer service department.
•Model Number
•Serial Number (if any)
•Part Description and Number as shown in Replacement parts Catalog

LIMITED WARRANTY

Residential Power Vented Tubular Propeller Unit Heaters

1.

The "Manufacturer" warrants to the original owner at original installation site that the above model Gas-Fired
Heater ("the Product") will be free from defects in material or workmanship for (1) year from the date of
shipment from the factory, or one and one-half (1-1/2) years from the date of manufacture, whichever occurs
first. The Manufacturer further warrants that the complete heat exchanger, flue collector and burners be free
from defects in material or workmanship for a period of ten (10) years from the date of manufacture.  If upon
examination by the Manufacturer the Product is shown to have a defect in material or workmanship during the
warranty period, the manufacturer will repair or replace, at its option, that part of the Product which is shown
to be defective.

2.

This limited warranty does not apply:
a. if the product has been subjected to misuse or neglect, has been accidentally or intentionally damaged,

has not been installed, maintained, or operated in accordance with furnished written instructions, or has
been altered or modified in any way by any unauthorized person.

b. to any expenses, including labor or material, incurred during removal or reinstallation of the Product
c. to any damage due to corrosion by chemicals, including halogenated hydrocarbons, precipitated in the air
d. to any workmanship of the installer of the Product

3.

This limited warranty is conditional upon:
a. advising the installing contractor, who in turn notify the distributor or manufacturer
b. shipment to the Manufacturer of that part of the Product thought to be defective. Goods can only be

returned with prior written approval of the Manufacturer.  All returns must be freight prepaid.

c. determination in the reasonable opinion of the Manufacturer that there exists a defect in material or

workmanship

4.

Repair or replacement of any part under this Limited Warranty shall not extend the duration of the warranty
with respect to such repaired or replaced part beyond the stated warranty period.

5

.

THIS LIMITED WARRANTY IS IN LIEU OF ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, AND
ALL SUCH OTHER WARRANTIES, INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE HEREBY DISCLAIMED AND
EXCLUDED FROM THIS LIMITED WARRANTY.  IN NO EVENT SHALL THE MANUFACTURER BE LIABLE
IN ANY WAY FOR ANY CONSEQUENTIAL, SPECIAL, OR INCIDENTAL DAMAGES OF ANY NATURE
WHATSOEVER, OR FOR ANY AMOUNTS IN EXCESS OF THE SELLING PRICE OF THE PRODUCT OR
ANY PARTS THEREOF FOUND TO BE DEFECTIVE. THIS LIMITED WARRANTY GIVES THE ORIGINAL
OWNER OF THE PRODUCT SPECIFIC LEGAL RIGHTS. YOU MAY ALSO HAVE OTHER RIGHTS WHICH
MAY VARY BY JURISDICTION.

In the interest of product improvement, we reserve the right to make changes without notice.

Summary of Contents for RF-30

































Reviews: