HEPAPro 13 Vacuum
Thank you for your recent Sterling purchase. You have
bought a high quality, long-life commercial vacuum cleaner.
For your safety and continued satisfaction with this product,
please read this owner’s manual carefully before using. For
your information, all parts used in the manufacturing of this
vacuum cleaner meet or exceed rigid quality control stan-
dards. We stand behind all our products and are available
to assist you with a knowledgeable and dedicated staff. If
we can help you in any way, please call Customer Service at
844-822-7787.
We also recommend that you visit our website www.ster-
lingna.com for the fastest most efficient way to complete
your product registration and see other Sterling products
and accessories to meet your cleaning needs.
About the Machine
To Connect the Hose:
Insert the hose end into the tank inlet until it clicks. To remove the hose, press the button
on top of the hose inlet, and remove hose.
Assembly Instructions:
Insert casters into sockets on bottom of canister. Push casters until seated. Attach hose
to coupling on front of can.
Maintenance:
This vacuum cleaner contains no user serviceable parts. If repair is needed, please take the vacuum
cleaner to an authorized Sterling factory service center.
To Operate:
The vacuum cleaner is designed for dry/wet pickup simultaneously with HEPA filter . Make sure foam
filter sleeve is installed on float assembly. Make sure float moves freely. When the liquid level in the tank rises to a
point just below the inlet, the float assembly shuts off air flow, thus preventing overflow and possible damage to the
vacuum motor. Install motor head. It needn’t replace any parts for dry/wet pickup.
CAUTION
Do not use this vacuum to pick up hazardous materials without HEPA filter being installed.
Storage:
Coil cord in a large loop and insert under. The accessories can be inserted on the motor head. Grasp the
plug when unplugging from outlet. Do not pull the cord.
