9
+
SET BUTTON
1.
Press
and hold “Set Button” for 5 seconds to enter Programming Mode.
2.
When valve is in Programming Mode, press
“Set Button” to confirm setting and advance to next
menu option.
ADVANCE BUTTON
1.
Press and hold
“Advance Button” for 5 seconds to initiate an immediate regeneration cycle.
2.
Press
and release “Advance Button” during a regeneration cycle to immediately advance the valve
to the next step in the regeneration process.
3.
When the valve is in Programming Mode, press the
“Advance Button” to move the cursor.
UP BUTTON
1.
When the valve is in the Programming Mode, press
“Up Button” to adjust setting.
NEST Series Programming
Advance Button
FIGURE 6: Front of Electronic Meter Timer Assembly
