background image

OPERATION

 

 
Do not switch power on and off in quick succession as this will damage the compressor and 
cause the appliance to fail. 

 
After completing electrical installation, power can be switched on at the mains. 

 

On power up the compressor and fans will start and the internal light should illuminate 
(ensure light switch is on). 

 
The temperature is controlled by a thermostat which is factory set at position 3 this should not 
need adjusting.  The cabinet should be left on at all times 

 
Ensure doors are kept closed when not serving failure to do so will cause the cabinet to 
have reduced efficiency and will cause condensation and ice build up on the cooling plate.  
If excess ice builds up switch cabinet off and allow it to defrost. Remove any excess water from 
inside the cabinet.
 

MAINTENANCE

 

 

Please note; maintenance or cleaning should not be carried out while the appliance is 
connected to the power supply. 

 
(Due to electrical regulations only a limited amount of user maintenance can be carried out.)

LIGHT AND STARTER 

To replace the lamp and or starter switch, turn the cabinet off and un-plug. Remove the lamp 
cover then simply twist lamp/starter to remove, replace new in reverse. 

CLEANING

 

Both the interior and exterior can be wiped cleaned with a warm damp cloth do not use 
abrasive cream cleaners.

  
For sliding door cabinets the door channels should be wiped clean every week and any spillage 
should be removed immediately 

All other maintenance should be carried out by a properly trained and qualified person. 

It is recommended that the condenser is cleaned at least once every 12 months. Access is 
from the rear of the cabinet by the removal of the right cover panel. The condenser should be 
brushed with a stiff brush and debris should be removed with a vacuum cleaner. 

Note the 

cabinet should be disconnected from the supply before any panel is removed. Failure to 
remove the cabinet can result in the warranty being made void.

DISPOSAL

The crossed out wheeled bin symbol means that within the European Union the product must 
be taken to a licensed disposal recycling facility. 
 

Do not dispose of these products as unsorted municipal waste.

Reviews: