Technical Information
Fixture:*
basin area
top area
Bathing well
40
″
(101.6 cm)
x 21
″
(53.3 cm)
52
″
(132.1 cm)
x 29
″
(73.7 cm)
water depth
capacity
To overflow
11
″
(27.9 cm)
40 gal (151.4 L)
* Approximate measurements for comparison only.
Model
door maximum
width
door maximum
height
71100116
71100118
71100126
71100128
71100316
71100326
58-1/2
″
(148.5 cm)
56-1/2
″
(142.2 cm)
Installation Notes
Install this product according to the installation guide.
Size the drain cutout to fit the drain assembly that will be
used.
End stud positioning is critical if nailing-in flanges are to be
used.
Double studding is recommended for pivot shower door
installations.
Studs should be positioned roughly as shown for support clip
or roofing nail installation.
Attach grab bars at the specified backer board locations only.
1" (2.5 cm)
3-1/2" (8.9 cm)
4" (10.2 cm)
10" (25.4 cm)
Backer board locations
Note:
Right and left end walls are
the same, only mirrored.
3-1/2"
(8.9 cm)
37-1/2"
(95.3 cm)
6" (15.2 cm)
(Typical)
14"
(35.6 cm)
16"
(40.6 cm)
24-1/2"
(62.2 cm)
8"
(20.3 cm)
4"
(10.2 cm)
8-3/4"
(22.2 cm)
17-1/4"
(51.4 cm)
11-1/2" (29.2 cm)
60" (152.4 cm) Min
60-1/8" (152.7 cm) Max
20"
(50.8 cm)
19"
(48.3 cm)
16"
(40.6 cm)
60"
(152.4 cm)
73-1/4"
(186.1 cm)
53"
(134.6 cm)
30" (76.2 cm)
1-1/2" (3.8 cm)
Recommended Support Clip or Roofing Nail
Location (5 Total)
37-1/2" (95.3 cm)
36" (91.4 cm)
2" (5.1 cm) D. Drain
Drain Cutout
1-1/4"
(3.2 cm)
3"
(7.6 cm)
3-1/2"
(8.9 cm)
Back Wall
End Wall
1" (2.5 cm)
1" (2.5 cm)
3-1/8" (7.9 cm)
Overflow Detail
18" (45.7 cm) Grab Bar
24" (61 cm) Grab Bar
24" (61 cm)
Grab Bar
Product Diagram
ENSEMBLE
TM
ENSEMBLE
TM
36
″
(91.4 cm) OVAL BATH/SHOWER SYSTEM WITH BACKER BOARDS
Page 2 of 2
1065810-4-
A
