Steris Vividimage RLM274K, Operation Manual

Page: 15 / 27

OSD (On-Screen Display) Vividimage
®
4K Surgical Display
OPM3000, Rev. C Operation Manual 15
Factory Reset: Resets all settings to the factory defaults. Factory defaults are listed in “Settings for Fixed
Presets” on page 15.
Set Password: Sets the password, a four-digit code, to enter when the keypad is locked. You must enter the
existing password first, and then the new password. To enter a password, press the

and

buttons to select a
number from 0 to 9, and then press the

button to move to the next digit. Press

when you're done. If you
haven't set a password, the password is 0000.
Usage Counter: Displays the total amount of time the monitor has been on during its lifetime.
Firmware Version: The last entry in the System menu is the firmware version number for the display.
Settings for Fixed Presets
These are the settings for the fixed presets and the factory default. You cannot modify these presets. To choose a
preset, see “Preset Menu” on page 12. To reset the values to the factory defaults, click the Menu button, go to the
System menu, and select Factory Reset. For more information, see “Factory Reset” on page 15.
Lap1 Lap2 Lap3 Lap4 Antrho1 Anthro2 Anthro3 PACS Endo4K Factory
Gamma MON1 2.2 1.9 MON1 2.0 2.0 2.0 DICOM 1.8 2.2
Background Brightness 62 75 62 56 82 56 53 62 62 62
Contrast 50 52 50 50 50 50 50 50 51 50
Color Saturation 50 52 50 50 50 60 60 50 50 50
Hue 50 50 50 50 50 50 50 50 40 50
Black Stretch 50 50 50 50 50 50 46 50 35 50
White Stretch 50 50 50 50 70 55 43 50 50 50
Digital Brightness 50 50 50 45 50 45 40 50 50 50
Red Gain 50 50 50 50 50 49 49 50 47 50
Green Gain 50 50 50 50 50 50 50 50 51 50
Blue Gain 50 52 50 50 50 56 56 50 57 50
Red Bias 50 50 50 50 50 50 50 50 50 50
Green Bias 50 50 50 50 50 50 50 50 50 50
Blue Bias 50 50 50 50 50 50 50 50 50 50
Aspect Normal Normal Normal Normal Normal Normal Normal Normal Normal Normal